Tag Archives: Crafts

Knitted Mermaid Tail Blanket

About this time last year, I discovered mermaid tail blankets. I immediately wanted to make one, but most patterns I could find were for crocheting, and I only know how to knit. After some searching, I was able to find a free knitted pattern called Jean Lafitte’s Mermaid Lap Blanket.  The finished project, was nice, but I wanted to try out a few variations for myself. Here is my version of a knitted mermaid tail blanket. Enjoy!

A PDF of the pattern is available here: Knitted Mermaid Tail Blanket FINAL

3 Mermaid Tail Blankets

Size:
Kids to short adults (I sized it to fit me & I’m 5’ 2”) but can be easily lengthened by adding sets of scales (1 scale set = 4 double-seed stitch rows).
You will need:
1) Super bulky (6) weight yarn, approximately 440 yds. ( I used Bernat Blanket.)
2) At least 1* 24in (60cm) or longer circular needles in size US 19 (66mm)
3) Tapestry Needle

*I prefer to use 2 circular needles. It allows me to knit the flat parts like using normal straight needles, and also makes it easier to knit the tighter round sections.

** Gauge isn’t super important, but mine was 3 sts x 3 rows over 2 inches.
Finished blanket measures:
44 inches around at widest point
42 inches long from waist to start of caudal fin
77 inches from tip to tail

Glossary:
k = Knit
p = Purl
k2tog = Knit 2 stitches together
p2tog = Purl 2 stitches together
slm = Slip marker
kfb = Knit into the front and then the back of stitch (creates 2 stitches)
st, sts = Stitches

Pattern Notes:
The blanket is knit top down and begins with a 3×3 rib stitch. The main body consists of a double-seed stitch to create a scale-like texture and the caudal fin uses a 2×2 rib stitch to form fin rays.

PATTERN:

Cast on 63 stitches [63STS]

Ribbing
Row 1 k3, p3 to end
Row 2 p3, k3 to end
Rows 3-8 repeat 3 sets of Rows 1&2
Row 9 k3, p3 to end

Scales/Body
Row 10 k1, (p1, k1 to end)                                                          Row 11 p1, (k1, p1 to end)
Row 12 p1, (k1, p1 to end)                                                          Row 13 k1, (p1, k1 to end)
Row 14 k1, (p1, k1 to end)                                                          Row 15 p1, (k1, p1 to end)
Row 16 p1, (k1, p1 to end)                                                          Row 17 k1, (p1, k1 to end)
Row 18 k1, (p1, k1 to end)                                                          Row 19 p1, (k1, p1 to end)
Row 20 p1, k1, p1, k2tog, (p1, k1 to last 5 sts), k2tog, p1, k1, p1 [61STS]
Row 21 k1, (p1, k1 to end)
Row 22 k1, (p1, k1 to end)                                                          Row 23 p1, (k1, p1 to end)
Row 24 p1, (k1, p1 to end)                                                           Row 25 k1, (p1, k1 to end)

Row 26 Join work in the round by slipping first stitch of row over last stitch of row and
purl. (In other words, p2tog first and last stitches to join the round.)
Then k1, p1 to end. [60STS]

Mermaid Tail Top

Starting out with a straight stitch and joining the ends together creates a slit in the back which makes it easier to get in and out of the blanket.

Row 27 slm, k1, p1 to end
Rows 28&29 slm, p1, k1 to end
Rows 30&31 slm, k1, p1 to end
Row 32 slm, k1, p1, k1, p1, k2tog, p1, k1, p1, k1, p2tog, k1, p1, k1, p1, k2tog, (p1, k1x12)
p2tog, k1, p1, k1, p1, k2tog, p1, k1, p1, k1, p2tog, k1, p1, k1, p1 [54STS]

Row 33 slm, k1, p1 to end
Rows34&35 slm, p1, k1 to end
Rows 36&37 slm, k1, p1 to end
Rows 38-39 slm, p1, k1 to end
Row 40 slm, p1, k1, p1, k2tog, p1, k1, p1, k2tog, p1, k1, p1, k2tog, (p1, k1)x12, p2tog,
k1, p1, k1, p2tog, k1, p1, k1, p2tog, k1, p1, k1 [48STS]

Row 41 slm, p1, k1 to end
Rows 42&43 slm, k1, p1 to end
Rows 44&45 slm, p1, k1 to end
Rows 46&47 slm, k1, p1 to end
Row 48 slm, k1, p1, k2tog, p1, k1, p2tog, k1, p1, k2tog, (p1, k1 x12), p2tog, k1, p1,
k2tog, p1, k1, p2tog, k1, p1 [42STS]

Row 49 slm, k1, p1 to end
Rows 50&51 slm, p1, k1 to end
Rows 52&53 slm, k1, p1 to end
Rows 54&55 slm, p1, k1 to end
Row 56 slm, p1, k2tog, p1, k2tog, p1, k2tog, (p1, k1 x12), p2tog, k1, p2tog, k1,
p2tog, k1 [36STS]

Row 57 slm, p1, k1 to end
Rows 58&59 slm, k1, p1 to end
Rows 60&61 slm, p1, k1 to end
Rows 62&63 slm, k1, p1 to end
Row 64 slm, k1, p2tog to end [24STS]
Row 65 slm, k1, p1 to end
Row 66 Lay body of tail flat on the ground. with the slit you created with the first 26 rows centered so that the caudal fin will lay flat. Match up the 24 stitches one in front
and one in back so that there are 12 pairs of stitches. With other needle, slip
back stitch through front stitch 12 times so that there are 12 stitches remaining
and the end of the tail is closed.[12STS]

Caudal Fin

The body of the tail is closed on Row 66 and the caudal fin is created using straight stitches and short rows. Make sure that the slit at the top of the blanket is centered in relation to the caudal fin so that the blanket lays flat.

Caudal Fin
Row 67 k1, kfb x10, k1 [22STS]
Rows 68&69 k to end
Row 70 k1, kfb x20, k1 [42STS]
Row 71 k2, (p2, k2) to end Row 72 p2, (k2, p2) to end
Rows 73-90 Repeat 9 sets of rows 71 & 72

BEGIN SHORT ROWS.
Row 91A (k2, p2) x5, k1 [21STS]
Row 92A turn work, p1, (k2, p2) x5 [21STS]
Row 93A (k2, p2) x4, k2, p1 [19STS]
Row 94A turn work, k1, (p2, k2) x4, p2 [19STS]
Row 95A (k2, p2) x4, k1 [17STS]
Row 96A turn work, p1, (k2, p2) x4, k1 [17STS]
Row 97A (k2, p2) x3, k2, p1 [15STS]
Row 98A turn work, p1, (k2, p2) x3, k2 [15STS]
Row 99A (k2, p2) x3, k1 [13STS]
Row 100A turn work, p1, (k2, p2) x3 [13STS]
Row 101A k2, p2, k2, p2, k2, p1 [11STS]
Row 102A turn work, k1, p2, k2, p2, k2, p2 [11STS]
Row 103A k2, p2, k2, p2, k1 [9STS]
Row 104A turn work, p1, k2, p2, k2, p2 [9STS]
Row 105A k2, p2, k2, p1 [7STS]
Row 106A turn work, k1, p2, k2, p2 [7STS]
Row 107A k2, p2, k1 [5STS]
Row 108A turn work, p1, k2, p2 [5STS]
Row 109A k2, p2 [4STS]
Row 110A turn work, k2, p2 [4STS]
Row 111A k2, p1 [3STS]
Row 112A turn work, k1, p2 [3STS]
Row 113A k2 [2STS]
Row 114A turn work, p2 [2STS]

Bind off 21 stitches. Slip last bind off stitch over the first stitch in the second half of row. Weave yarn through your remaining 22 stitches so that you are starting the next row on the outer edge of the tail rather than the middle.

Row 91B (k2, p2) x5, k2tog [21STS]
Row 92B turn work, k1, (p2, k2) x5 [21STS]
Row 93B (k2, p2) x4, k2, p1 [19STS]
Row 94B turn work, k1, (p2, k2) x4, p2 [19STS]
Row 95B (k2, p2) x4, k1 [17STS]
Row 96B turn work, p1, (k2, p2) x4, k1 [17STS]
Row 97B (k2, p2) x3, k2, p1 [15STS]
Row 98B turn work, p1, (k2, p2) x3, k2 [15STS]
Row 99B (k2, p2) x3, k1 [13STS]
Row 100B turn work, p1, (k2, p2) x3 [13STS]
Row 101B k2, p2, k2, p2, k2, p1 [11STS]
Row 102B turn work, k1, p2, k2, p2, k2, p2[11STS]                                                                      Row 103B k2, p2, k2, p2, k1 [9STS]
Row 104B turn work, p1, k2, p2, k2, p2 [9STS]
Row 105B k2, p2, k2, p1 [7STS]
Row 106B turn work, k1, p2, k2, p2 [7STS]
Row 107B k2, p2, k1 [5STS]
Row 108B turn work, p1, k2, p2 [5STS]
Row 109B k2, p2 [4STS]
Row 110B turn work, k2, p2 [4STS]
Row 111B k2, p1 [3STS]
Row 112B turn work, k1, p2 [3STS]
Row 113B k2 [2STS]
Row 114B turn work, p2 [2STS]

BIND OFF. WEAVE IN ENDS.

 

 

Advertisements

Simple Ornaments

 

I made some adorable ornaments as holiday gifts. They didn’t take too long and turned out beautiful!

Ceramic Ornament Supplies

 

WHAT YOU’LL NEED:

  • Pre-made, ceramic ornaments
  • A pencil
  • Paint markers
  • Clear acrylic gloss coating

 

 

 

 

 

 

 

 

Step 1

Create a design on the ornament using the pencil. You can use any design, but I’m partial to Zentangle patterns, they are simple to draw, but look complex. If you feel confident about your design, feel free to skip this step and free-draw with the paint markers.

Ornament--Purk--Outline

I used a pencil to outline a Zentangle pattern called “Purk”.

Step 2

Use the paint markers to color in the design. Make sure to let each side dry before turning the ornament over to prevent smudging.

Ornament--Purk--Colors

Tip: If the paint marker color you want to use is light, you may want to erase your pencil marks before starting to fill in your design. The remaining marks will be dark enough to use as a guide, but light enough that they won’t show through to the finished product.

Step 3

Use the clear acrylic spray to create a glossy, finished look. Again, let each side of the ornament dry individually.

Ornaments--Clear Coat

Make sure you spray the ornaments in a well-ventilated area. I always just take mine outside.

 

Here are a few of my favorites:

Hollibaugh Star

I used a Zentangle pattern called “Hollibaugh” to create this design.

Bauble

This ornament incorporates 3 distinct patterns to create a cohesive design.

 

Plaid Tree

I made a plaid pattern by varying the width of straight vertical and horizontal lines.

 

Color Me Awesome

About 5 years ago, I fell in love with tie-dying. I spent an entire summer slowly testing out different ways to mix colors, fold, and tie (or rubber band). It has since become one of my favorite hobbies. It’s so empowering to take something blank and make it beautiful. It’s also strangely calming. I broke out my tie-dye supplies on Saturday for the first time this summer.

Tie-Dye has to sit for 24 hours before you can wash it out and find out what it looks like.

Tie-Dye has to sit for 24 hours before you can wash it out and find out what it looks like.

The finished product is always a slight surprise. These items were from the same batch, but the bibs turned out much brighter than the t-shirt.

The finished product is always a slight surprise. These items were from the same batch, but the bibs turned out much brighter than the t-shirt.

When Sunday morning rolled around (and I was still waiting to see how my first batch turned out!) I was still in full-on Rainbow Brite mode. It occurred to me that I could try to combine a classic tie-dye pattern (the spiral) into a different dying technique (sun-sensitive dye). Sun-sensitive dye reminds me of a Polaroid picture: you paint the dye onto fabric in a dark room, then bring your canvass (whatever that canvass may be) into natural sunlight. The colors develop right before your eyes! I thought it would be fun to make a time-lapsed video of my project. I used Ok Go‘s “Upside Down & Inside Out” because the song just seemed to fit perfectly. Also, it was a great excuse to listen to the song over and over again! I’m having a little trouble uploading the video to this platform, but here’s a link so you can witness sun dying in all its glory!

My finished sun-dyed t-shirt [View from the Back].

My finished sun-dyed t-shirt [View from the Back].

My finished sun-dyed t-shirt [View from the Front].

My finished sun-dyed t-shirt [View from the Front].